Prince Albert Pee Thru Penis Wand by BDStyle

The Prince Albert Pee Thru Penis Wand by BDStyle is a surgical-grade stainless steel urethral device with a hollow core and detachable side arm made to connect to an existing Prince Albert piercing. It combines intense urethral stretch with specialised fluid play capability, suited to experienced practitioners seeking advanced sensation.

What you're getting

The Prince Albert Pee Thru Penis Wand by BDStyle is a precision-engineered urethral device built from surgical-grade stainless steel. The hollow shaft runs the full 81mm insertable length, creating a complete channel for fluid exploration whilst maintaining the intensity of an 8mm internal width. Unlike solid penis plugs, the hollow design opens possibilities that traditional sounds cannot deliver, whilst the detachable side arm bridges the gap between loose insertion devices and permanently anchored urethral wear.

The mirror-polished finish glides smoothly against sensitive urethral tissue and sterilises completely in boiling water or an autoclave. Dual ball ends—one 16mm sphere at the meatus and a 10mm sphere below—provide visual appeal and secure retention during sessions. The 7mm side arm clicks into place on an existing Prince Albert piercing, transforming this into a wearable system rather than a temporary insertion.

What it does well

• Hollow core adaptability: The open channel enables fluid exploration and creates sensations impossible with solid urethral sounds, whilst maintaining the intense stretch of 8mm width.
• Piercing integration: The detachable arm anchors reliably to a Prince Albert, eliminating the drift and repositioning that occurs with non-piercing devices during extended wear.
• Smooth insertion: Surgical steel warms to body temperature and the polished taper allows careful control as you work through the 81mm depth at your own pace.
• Sterilisation: Stainless steel tolerates boiling, autoclaving, and chemical sterilisation between sessions, making hygiene straightforward and thorough.
• Secure retention: The dual ball system anchors the device without causing discomfort, so you can focus on sensation rather than managing fit.

Dimensions and materials

• Total length: 98mm; insertable depth 81mm; external width at widest point (meatal ball) 16mm; internal urethral width 8mm throughout.
• Material: Surgical-grade stainless steel (body-safe, hypoallergenic, non-porous); mirror-polished finish for glide and visibility.
• Weight: Approximately 45 grams (steel density); substantial enough to be felt during wear.
• Detachable side arm: 7mm length, 4mm thickness; compatible with standard Prince Albert jewellery posts (typically 4–5mm diameter).
• Closure/connection: Push-fit assembly; side arm clicks on and off without tools; no threading or locking mechanism.
• Box contents: Device, detachable side arm, sterilisation instructions, care guide.

Getting started with a penis plug

Preparation is essential. Empty your bladder fully, wash your hands and genitals thoroughly with warm water, and inspect the wand for any damage or debris. Sterilise the device by boiling for ten minutes or using an autoclave, then allow it to cool to room temperature. Apply a generous amount of sterile lubricant (water-based or medical-grade) to the urethra and the shaft. If you are new to 8mm width, spend time with narrower Ribbed Penis Plugs first to acclimate gradually.

Lie back or sit comfortably, relax your pelvic floor completely, and guide the tapered tip to your urethral opening. Breathe slowly and allow gravity and gentle pressure to begin the insertion—never force it. The 81mm depth will take time; pause frequently to let tissue adjust. Once fully inserted, click the side arm into your Prince Albert piercing; you should hear a subtle click and feel the device anchor securely. Start with short sessions (15–20 minutes) and gradually extend duration as your body adapts.

Who it suits

Care and storage

After each session, flush the hollow core with warm water whilst holding it vertically, then disassemble the side arm and wash both components with mild soap and warm water. Dry thoroughly with a lint-free cloth and store the wand and arm separately in a clean, dry container away from moisture and dust. Sterilise by boiling for ten minutes every session, or use an autoclave if available. Never store whilst damp. Keep away from extreme heat, direct sunlight, and corrosive cleaning products.

Where to read more

Urethral play carries specific risks that require knowledge and care. Read our guide on Using Penis Plugs Safely to understand infection prevention, technique, and when to seek medical advice. Our resource library covers sterilisation standards, anatomy, and session planning for advanced practitioners.

What to expect

The 8mm width delivers considerably more intense stretch than standard sounds (typically 4–6mm). Most users find initial insertion takes 5–10 minutes of patient, relaxed breathing; rush the process and you risk tissue irritation. Once fully inserted, the sensation is often described as profound fullness combined with the unique awareness that comes from a hollow channel running through the length of the device. Expect some initial discomfort as your urethra adjusts, even if you have prior sound experience.

First-timers with this width commonly underestimate how long adaptation takes and attempt rapid insertion. The detachable side arm is a practical feature—once it anchors to your Prince Albert, the device becomes genuinely wearable for extended periods without slipping or repositioning. Many users report that this security transforms the psychological and physical experience, allowing deeper relaxation into the sensations.

Cleaning is straightforward: the hollow core must be flushed thoroughly (not merely rinsed) to remove all lubricant and biological fluid, which is why boiling or autoclaving after each use is non-negotiable. Stainless steel is forgiving in this respect—it tolerates aggressive sterilisation without degradation. The device itself rarely requires replacement, though the side arm may need gentle cleaning at the connection point if lubricant accumulates there.

Durability is excellent; surgical-grade steel will not develop pits, discolouration, or odour under normal care. The main variables in experience are your own urethral tolerance, consistency of sterilisation, and whether your Prince Albert jewellery diameter suits the 4mm-thick side arm connection—most standard PA jewellery does, but verify before purchase.

How it compares

Worth adding to your collection?

Shop the Prince Albert Pee Thru Penis Wand by BDStyle if you have a Prince Albert piercing and are ready to progress beyond solid sounds into hollow-core sensations. Order it from Malechastity.com.au with discreet Australia-wide delivery. This device brings together the intensity of 8mm width, the adaptability of a hollow channel, and the security of piercing-based anchoring—a genuine step forward for experienced practitioners who have outgrown standard options. Shipped Fast From Our Australian Warehouse.